Faq's
Yes, our pricing include the cost of 2-3 color print on two to four panels on soccer balls and two panels on rugby. We can print unlimited colours on some or all the panels on additional cost.
We can do minimum of 50 pcs . Quantities below this may be done at additional costs. We can do upto 100000 pcs in couple of months depending upon availability of production capacity and event schedule, the production days can vary depending on the orders in process.
For rubberised balls we can do any color balls in any quantity but for AFL and PVC Soccer balls we use only stock lot of PVC available for smaller quantities but above 2000 pcs of balls we can make any color.
The goods are shipped using express modes of international courier and airline services. The urgent orders are shipped through express mode. All our orders are delivered doorstep FIS pricing.
The balls are supplied in deflated form.
We confirm the production lead time at the time of accepting the order. Our production time is the number of working days. We are not able to guarantee the delivery time due to the factors beyond our control. We do chase all the shipments from the point of despatch from our doorstep till it reaches your destination and inform you of the delivery schedule based on the information provided by freight companies. We shall not be liable for any damages caused by failure or delay in shipping the goods described herein, if such failure or delay is due to any war, embargo, riot, fire, flood, accident, mill condition, strike or other labour difficulty, an act of God, an act of a governmental authority, transportation shortage or failure, inability to obtain sufficient fuel, labour, materials or manufacturing facilities, or any other cause beyond our reasonable control..
We cannot put all the items on our website, the items displayed are illustrative and not exhaustive. We can do any item for you as we are extension of our factory and trade facilitators.
The sizes are approx and as follows:
Sizing Chart for Rugby and AFL
Sizing For Soccerballs - whole circumference wise:
Size 5 - 68 cms
Size 4 - 64 cms
Size 3 - 58 cms Size 2 - 54 cms
Size 2( 12 Panel ) - 51 cms
Mini Soccer Ball 32 Panel - 42cms, 47cms
Mini Soccer Ball 12 Panel - 35 cm, 42cms, 47cms
We need editable vector files eg adobe illustrator, eps files.
Yes, there are set up charges for the balls depending upon the colours of the logo.
When we submit our quote to you, it is always including all duties, taxes and import fees unless stated otherwise.
Production starts from confirmation of artwork and payment deposit as per Proforma Invoice.
The normal production time is the following working day as per no of pieces:
50-1000 pcs | 3 weeks |
1000-2500 pcs | 4 weeks |
2500-5000 pcs | 5 weeks |
5000-10000 pcs | 6 weeks |
We commit the production time only, the delivery is done through international Airlines and Courier companies. We have no control over shipping companies , custom clearance at our end or destination port. We handle urgent shipment through express mode and always advise the estimated delivery times at the time of enquiry from our customers. Though third party is involved in shipping, but we always do the chase till the shipment lands at your doorstep, keeping you updated about the whole process.
If you over inflate a ball than the recommended pressure it will burst or if you under inflate it, it will be soft. Use the manufacturer’s recommended air pressure that is printed on the ball. Most of the soccer balls have recommended pressure of 6 to 8 lbs or PSI (Pounds per square inch) or 0.6 or 0.8 BAR. It is advised that you always use a pressure gauge to measure the amount of the pressure while inflating the ball.
Place a couple of drops of glycerine oil or silicone oil into the valve. This improves the life of the valve and also eases it for insertion of the inflation needle. Moisten the inflation needle before the insertion, for moistening you may use the silicon oil.
If your soccerball has printed 0.6 Bar on it, then for converting it into PSI, follow the following formula
= 14.5037 x 0.6
= 8.7 PSI
If you want to convert PSI or LBS to BAR (KGS)
= 0.68948 x the amount of PSI (LBS) printed on the ball
Use the ball but do not abuse or misuse the ball is the only care you need to take.
Few dont’s:
- Do not kick your ball hard against the walls, your ball will become out of shape.
- Do not use harsh detergent’s to clean the ball.
- Do not hit the ball on rough surfaces such as gravel or concrete. Excessive wear will occur due to use on rough surface.
Few Do’s
- After every play, remove excessive dirt from the ball by wiping it with a damp cloth.
- If there are excessive stains on the ball, you may use some mild soap to clean the ball.
- Always follow your manufacturer’s instructions for inflating the ball.
- Use a good inflating pump for inflating the ball and pressure gauge to monitor the pressure.